Profiles
/shaped-wire-width152.jpg)
Stainless steel shaped wire (profiles) in a wide variety of near-net shapes, minimizing machining and finishing operations. The shaped wire is delivered with bright cold-rolled surface and close dimensional tolerances.
Sandvik's in-house tool manufacturing allows for special shapes in small batches, and we assist in developing a design that suits the customer's needs.
Shapes
Sandvik can provide profiles in more than 1300 different shapes.
Here are a few examples:
Materials
| Sandvik grade | UNS | ASTM | EN steel no. |
|---|---|---|---|
| Safeni 48 | - | - | - |
| Sandvik SAF 2507 | S32750 | - | - |
| Sandvik SAF 2205 | S31803 | - | 1.4462 |
| Sandvik 1802 | S18235 | - | 1.4523 |
| Sandvik Bioline 316LVM | S31673 | F138 | 1.4441 |
| Sandvik 5R60 | S31600 | 316 | 1.4401 |
| Sandvik 5R10 | S30400 | 304 | 1.4301 |
| Sandvik 12RA12 | S30300 | 303 | 1.4305 |
| Sandvik 11R51 | S30151 | 302 | 1.4310 HS |
| Sandvik 12R10 | S30200 | 302 | 1.4310 |
Mechanical properties
Sandvik shaped wire (profiles) can be delivered from annealed to hard condition. Tensile strength according to customer's request, with tolerance +/- 100 Mpa.
Size range
| Thickness | Tolerance | Width | Tolerance |
|---|---|---|---|
| < 3 mm (0.1181 in.) |
+ /- 0.05 mm (0.0002 in.) |
5 mm (0.1968 in.) |
+ /- 0.05 mm (0.0002 in.) |
| 3 < 5 mm (0.1181 < 0.1968 in.) |
+ /- 0.07 mm (0.0003 in.) |
5 < 10 mm (0.1968 < 0.3937 in.) |
+ /- 0.07 mm (0.0003 in.) |
| 5 < 8 mm (0.1968 < 0.3150 in.) |
+ /- 0.10 mm (0.0004 in.) |
10 < 21 mm (0.3937 < 0.8268 in.) |
+ /- 0.10 mm (0.0004 in.) |
Straightness
Straightness is measured over a specified length. Standard value is 5 mm/m.
Delivery forms
Sandvik shaped wire can be supplied in the following delivery forms:
- Coils
- Spools
- Straightened lengths of 3–4 m (+/- 10 mm for fixed lengths)
Testing
Sandvik's shaped wire testing capabilities include, for example:
- Intergranular corrosion test
- Mechanical test
- Microstructure test
- Microcleanliness test
- Ultrasonic test at billet stage