Sandvik NiMn2ROE (Wire)
Datasheet updated 2013-02-18 14:23:37 (supersedes all previous editions)
Sandvik NiMu2ROE is a vacuum remelted nickel alloy with good characteristics for cold working fabrication and thermal demands. The grade does not permit evolution of gases during its utilization. Sandvik NiMu2ROE is typically used for lamp bulb conducting electrodes.
Standards
- W.Nr. 2.4110
- DIN 17741
Chemical composition (nominal), %
| C | Si | Mn | Cr | Ni | Fe | Cu | Ti | Al | Others |
|---|---|---|---|---|---|---|---|---|---|
| max | |||||||||
| 0.03 | - | 2.0 | - | Bal. | - | - | - | - | - |
Forms of supply
| Dimension, mm |
Surface finish
|
Spool no
|
ABNT No
|
Weight maximum, kg
|
|---|---|---|---|---|
| 0.20 - 0.40 |
BT1)
|
3
|
100
|
1.5
|
| 0.41 - 0.80 |
BT
|
4
|
125
|
3.0
|
| 0.81 - 1.24 |
BT
|
5
|
160
|
6.0
|
| 1.25 - 1.75 |
BT
|
6
|
200
|
12.0
|
| 1.76 - 1.90 |
TS1)
|
Coils
|
40.0
|
|
| >1.90 |
TS
|
Coils
|
50.0
|
|
1) Bright wet drawn
2) Coated (dry drawn)
We can also supply other weights and surface finishes on special request.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Send PDF via email
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email