Sandvik 410NiMo (Welding wire)
Datasheet updated 2012-08-02 19:08:56 (supersedes all previous editions)
Sandvik 410NiMo is a filler material for welding of of parent metals of similar composition with high resistance to erosion and cavitation. It is particularly suited for hydroturbine components and surfacing of continuous caster rolls. Sandvik 410NiMo is available as wire and rods.
Standards
- AWS ER410NiMo
- EN number (13 4)
Product standards
- EN ISO 14343
- ASME/AWS SFA5.4
Filler metal
Chemical composition, wt%
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | N |  |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.01 | 0.4 | 0.6 | 0.002 | 0.015 | 12 | 4.5 | 0.5 | 0.3 | 0.015 | |
Chemical composition - all-weld metal
The following data is typical for non heat treated all-weld metal made by MIG welding with a shielding gas of Ar + 2%O2.
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | N |
|---|---|---|---|---|---|---|---|---|---|
| 0.006 | 0.3 | 0.4 | 0.02 | 0.005 | 12 | 4.5 | 0.6 | 0.1 | 0.02 |
Microstructure - all-weld metal
Martensitic-austenitic microstructure
Mechanical properties - all-weld metal
|
Temperature
|
oC
|
20
|
-20
|
201)
|
|---|---|---|---|---|
|
Yield strength, RP0.2
|
MPa
|
790
|
-
|
-
|
|
Tensile strength, Rm
|
MPa
|
990
|
-
|
min 760
|
|
Elongation, A
|
%
|
15
|
-
|
min 15
|
|
Reduction in area, Z
|
%
|
60
|
-
|
-
|
|
Impact strength, Charpy V
|
J
|
48
|
42
|
-
|
|
Hardness, Vickers
|
HV
|
320
|
-
|
-
|
1) after heat treatment at 590-620 oC (1095- 1150 oF), held for 1 hour, and air cooled.
Corrosion resistance - all-weld metal
Sandvik 410NiMo has good resistance to erosion corrosion and cavitation.
Applications
For welding parent metals of similar composition, weld surfacing hydroturbine components and surfacing of continous caster rolls.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Send PDF via email
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email