Sandvik 19.13.4.L (Welding strip)
Datasheet updated 2011-10-13 13:24:16 (supersedes all previous editions)
Sandvik 19.13.4.L is a strip electrode used for the second layer to obtain corrosion resistant overlay weld deposit on a transition layer of Sandvik 22.11.L or 21.13.3.L on C-, CMn- and low-alloy steels using submerged-arc welding (SAW) with the flux Sandvik 10SW or electroslag welding (ESW) with the flux Sandvik 47S.
It gives a 317L weld deposit. There are also other possible combinations and conditions.
Standards
- AWS EQ317L
- EN number B 19 13 4 L
Product standards
- EN ISO 14343
- ASME/AWS SFA5.9
Chemical composition - strip electrode
|
C
max |
Si | Mn |
P
max |
S
max |
Cr | Ni | Mo | Cu max |
|---|---|---|---|---|---|---|---|---|
|
0.02
|
0.4 | 1.5 |
0.020
|
0.020
|
19 | 14 | 3.6 | 0.3 |
Ferrite content
The ferrite content is nominally 7 FN WRC.
Chemical composition of overlay
Typical chemical compositions in the second layer obtained on C-Mn steel and low-alloy steel.
 |
Type of overlay
|
C
|
Cr
|
Ni
|
Mo
|
FN, WRC
|
|---|---|---|---|---|---|---|
| SAW 21.13.3.L+19.13.4.L/10SW |
317L, E317L
|
max 0,04
|
18-19
|
12,5-13,5
|
3,1-3,5
|
3-8
|
| ESW 21.13.3.L+19.13.4.L/47S |
317L, E317L
|
max 0,03
|
18-19
|
12,5-14
|
3,3-3,6
|
3-8
|
| ESW 22.11.L+19.13.4.L/47S |
317L, E317L
|
max 0,03
|
18-19
|
12,5-13,5
|
3,0-3,5
|
3-8
|
| ESW 24.13.L+19.13.4.L/49S |
E316L1), EN1.4435
|
max 0,03
|
18-19
|
12,5-13,5
|
2,5-3,0
|
3-8
|
1) minimum 2,5 % Mo
Consider the figures as examples. Parameters selected and conditions influence on the result. Please contact Sandvik for details and guidelines.
Mechanical properties of overlay
Passes side bend testing according to ASME Section IX.
Corrosion properties of overlay
Equal to the base metal 317L. The resistance to pitting corrosion better than for 316L.
Welding data
| Process/Flux | Size |
Current, A
|
Voltage, V
|
Travel speed, mm/min
|
|---|---|---|---|---|
| SAW/10SW | 30 x 0.5 mm |
300 - 425
|
28-30
|
80 - 160
|
| SAW/10SW | 60 x 0.5 mm |
650 - 850
|
28-30
|
80 - 160
|
| SAW/10SW | 90 x 0.5 mm |
975 - 1275
|
28-30
|
80 - 160
|
| ESW/47S | 60 x 0.5 mm |
1100 - 1400
|
23 - 26
|
130 - 220
|
| ESW/47S | 90 x 0.5 mm |
1650 - 2100
|
23 - 26
|
130 - 220
|
Direct current, with electrode positive is normally used.
The welding data in the table represent the operation capability of the flux. The desired properties of the overlay are obtained by proper selection of the settings within the ranges.
Applications
19.13.4.L is used for weld surfacing of components in the chemical, petrochemical, marine industries where corrosion resistance on par with 317L is required. Typical components are pressure vessels, heat exchangers, shafts, industrial piping etc.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Send PDF via email
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email