Sanicro 61 (Tube and pipe, seamless)
Datasheet updated 2012-08-02 10:30:33 (supersedes all previous editions)
Sanicro 61 is a nickel alloy with addition of chromium and aluminium.
Standards
- UNS N06601
Chemical composition (nominal) %
| C | Si | Mn | P | S | Cr | Ni | Mo | Others |
|---|---|---|---|---|---|---|---|---|
| max | max | |||||||
| 0.03 | 0.3 | 0.6 | 0.025 | 0.015 | 23 | 60 | - | Al=1.3 |
Mechanical properties
At 20oC (68oF)
| Proof strength | Tensile strength | Elong. | ||
|---|---|---|---|---|
| Rp0.21) | Rm | A2) | ||
| MPa | ksi | MPa | ksi | % |
| min. | min. | min. | min. | min. |
| 205 | 30 | 550 | 80 | 30 |
1 MPa = N/mm2
1) Rp0.2 0 corresponds to 0.2% offset yield strength.
2) Based on L0 = 5.65 √S0 where L0 is the original gauge length and S0 the original cross-section area.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email