Sandvik 4L7 (Tube and pipe, seamless)
Datasheet updated 2012-08-02 09:37:35 (supersedes all previous editions)
Sandvik 4L7 is a carbon steel used for composite tubes.
Standards
- ASTM Grade A-1
- EN number 1.0425
- EN name P265GH
- W.Nr. 1.0405
- DIN St 45.8
- SS 1435
Product standards
- ASTM A210
- EN 10216-2
- DIN 17175 (withdrawn)
- SS 14 1435 (withdrawn)
Chemical composition (nominal) %
| C | Si | Mn | P | S | Cr | Ni | Mo | Others |
|---|---|---|---|---|---|---|---|---|
| max | max | max | ||||||
| 0.20 | 0.3 | 0.7 | 0.025 | 0.020 | - | - | - | - |
4L7 is a component in composite tube.
Physical properties
| Temperature, °C | W/m °C | Temperature, °F | Btu/ft h °F |
|---|---|---|---|
| 20 | 46 | 68 | 26.5 |
| 100 | 48 | 200 | 27.5 |
| 300 | 46 | 600 | 26.5 |
| 500 | 42 | 900 | 24.5 |
| Temperature, °C | Per °C | Temperature, °F | Per °F |
|---|---|---|---|
| 30-100 | 12.3 | 86-200 | 6.8 |
| 30-200 | 12.8 | 86-400 | 7.1 |
| 30-300 | 13.5 | 86-600 | 7.5 |
| 30-400 | 14.0 | 86-800 | 7.8 |
| 30-500 | 14.3 | 86-1000 | 8.0 |
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email