Sandvik 10RE51 (Hollow bar)
Datasheet updated 2012-08-02 10:42:21 (supersedes all previous editions)
Sandvik 10RE51 is a duplex (austenitic-ferritic) stainless steel characterized by resistance to stress corrosion cracking (SCC), high resistance to pitting, crevice and general corrosion and very high mechanical strength.
Standards
- UNS S32900
- EN number 1.4460
Product standards
EN 10297-2, EN 10294-2
Chemical composition (nominal) %
| C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|
| max | max | ||||||
| 0.04 | 0.5 | 0.8 | 0.040 | 0.030 | 26 | 5 | 1.3 |
Mechanical properties
| Proof strength | Tensile strength | Elong. | ||
|---|---|---|---|---|
| Rp0.2a) | Rm | Ab) | ||
| MPa | ksi | MPa | ksi | % |
| min | min | min | ||
| 485 | 70 | 620-800 | 90-116 | 20 |
1 MPa = 1 N/mm2
a) Rp0.2 and Rp1.0 correspond to 0.2% offset and 1.0% offset yield strength, respectively.
b) Based on L0 = 5.65 √S0 where L0 is the original gauge length and S0 the original cross-section area.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials.
Article functions
Related information
Print this datasheet
Export to PDF
Download this datasheet as PDF or send by email.
Download as PDF
Send PDF via email